Raychem XPI-S-7 Cold Lead Cable Reinforced (7J) 2.5 mm
XPI-S is a polymer insulated (PI) series heating cable, suitable for use in hazardous areas. It has been designed for use in freeze protection and temperature maintenance applications of pipes, tanks and other equipment. XPI-S is a re-enforced version of XPI, particularly suitable for areas with high demands on mechanical abuse of the heating cable. XPI-S offers an economical solution for a wide variety of heat-tracing applications, in particular for pipe lengths beyond the maximum circuit lengths of parallel heating cables (e.g. 250 m).
The inner insulation is a sandwich construction of high temperature ﬂuoropolymer and PTFE, the outer insulation is made of PTFE. This unique construction is very easy to terminate, highly ﬂexible and makes XPI a very safe and reliable product. It provides highest chemical withstand and most excellent mechanical strength, in particular at elevated temperatures.
XPI-S heating cables can be used for temperatures up to 260°C (continuous) and 300°C (intermittent short-term exposure). XPI-S is easy to install and has printed meter-marks. Pentair offers XPI-S heating cables in a very wide range of resistances, starting from 0.8 Ω/km up to 8000 Ω/km as well as a complete range of components for connection and splicing of the cables.
- Hazardous area, Zone 1 or Zone 2 (Gas) or Zone 21 or Zone 22 (Dust)
- Ordinary area
- Organic and inorganic corrosives
- System (heating units) PTB 08 ATEX 1102X
- II 2G/D Ex e II T2...T6 / Ex tD A21 IP65 T290...T80°C
- IECEx PTB 08.0051X
- Ex II 2G/D Ex e II T2...T6 / Ex tD A21 IP65 T290...T80°C
- PTB 08 ATEX 1088 U
- II 2G/D Ex e II / Ex tD A21
- IECEx PTB 08.0049 U
- Ex II 2G/D Ex e II / Ex tD A21
[Ω/km @ 20°C]
[x 10-3 /K]
|Max Exposure Temp||260°C (power of, continuous), 300°C (power off, intermittent for max 1000h)|
|Maximum Power Output||35 W/m (typical value, depending on application)|
|Min Bending Radius||2.5 x cable diameter for cable diameter < 6mm|
|Min Bending Radius||6 x cable diameter for cable diameter > 6mm|
|Minimum Clearance||20 mm|
|Minimum installation temperature||-70 °C|
|Nominal Voltage||Up to 450/750 Vac (U0/U)|