Raychem EMDR-10 Multi-Sensor Control Unit
Quick Find: 502
Part Code: 449554-000
|Variant||Roof and Gutter De-icing|
The EMDR-10 is used to ensure an energy efficient operation of the gutter snow melting sytem Icestop GM-2X/T. Compatible with GM-2X and 8BTV-2-CT cable and equipped with a temperature and moisture sensor, the thermostat only activates the system when detecting moisture and temperatures below zero, to ensure effective drainage of snowy water.
User-friendly control and saves up to 80% power.
|Max. switching current||10(4)amp 230VAC|
Frequently asked questions
Yes, when using trace heating on plastic pipes ensure that ATE- 180 aluminium tape is used to help disperse the heat around the pipe.
Yes, utilising our in-house design facilities, we can design your complete trace heating requirement.
If the surface area of the pump is substantially greater than that of the adjoining pipework then extra heating cable may need to be considered (depending on wattage of cable installed). Pumps and ...
Most applications can simply be straight traced, reducing costs of materials and installation time without compromising on operational requirements.
Yes, thermal insulation is required on all heat trace applications. Without insulation, surface heat losses can increase approximately 4-5 times.
Generally, no maintenance of our trace heating systems is required but it is recommended that the system is checked for operational and electrical integrity periodically or prior to the winter or p...
Full termination instructions are provided with all our heating tapes
System checks depend on the system installed, constant wattage systems can be fully checked for insulation resistance and continuity. Self regulating systems can only be checked for insulation resi...
When water pipes are exposed to cold temperatures either outdoors, underground or in small spaces, you can protect them from freezing by wrapping them with heat tape. Heating tape is actually a cor...
This is used for a pipe freeze protection application. Electric heat tracing, heat tape or surface heating, is a system used to maintain or raise the temperature of pipes and vessels. Trace heat...